If you are still browsing the internet the ‘old’ way, then you must have a look at this video…
Personally, I have been a RSS feed addict for over 3 years now, and have never looked back!
I use Google Reader as my primary feed reader.Do try it out and see the difference!
Finally after lot of R&D, yesterday i could finally browse the net over my 6600 using my PC’s internet connection over bluetooth !
Two things are possible.
1. You use the GPRS of your Mobile phone and browse on your PC.
2. You use the DSL (or other high speed connection) of your PC to browse on your Mobile phone.
#1 is pretty simple, and is very easy to setup on Nokia 6600. But #2 is not that simple. After reading lot of forums, i found that Nokia has on purpose blocked this feature in 6600.
If you have already done a search on this topic, you would have definitely come across this page. But the instructions there are quite cryptic, and not very clear. So, i did lot of search on various forums, and finally got it right. What i have done is, i have basically documented the steps that i followed to make it work. Do give it a try!. It might work for you as well. If it works (or doesn’t) do comment here!
Steps…
First lets set up the PC. Things to do on PC :
Deactivate all the Checkboxes in mRouter (at least the ones of the Bluetooth COM ports)
Goto Bluetooth settings and Deactivate everything else in Local services than Bluetooth serial port, note the com port you set as bluetooth serial port
Goto Phone and Modem options, go to “Modems” add a new one, activate “I will select it from a list”
Choose “Communications cable between 2 Computers” from the list (in Standard Modem Types)
Select the COM port from step3
In the modem settings set maximum port speed to 115200
Goto Network Connections and create a new connection (wizard)
Select Set up an advanced connection -> Next
Accept incoming connections -> Next
Check the Communications cable between two computers -> Next
Do not allow VPN connections ->
select a username you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later) -> Next
Select Internet Protocol -> Properties, select “TCI/IP address assignment” and set the IP range to something like 10.0.2.2-10.0.2.254
Remove Internet Connection Sharing from all interfaces
run cmd.exe and enter the following commands:
netsh routing ip nat install
netsh routing ip nat add interface "YOUR LAN INTERFACE NAME" full
netsh routing ip nat add interface Internal private
YOUR LAN INTERFACE NAME has to be replaced with the name of the interface connected to the internet
if there is a “Bluetooth Network” connection in Network Connections delete it
In network connections choose the incoming connection just created, and open its properties.
Click on the users tab, check the last checkbox which says “Always allow directly connected devices to such as palmtop computers to connect without using a password” (this step helped me!)
So, that’s the setup on the PC. Next we need to configure the 6600
Create a new Access Point on the phone (Setting|Connection|Access points|New access point|Use default settings).
Use the following settings for it:
Name: Bt (This name is important, the gnubox software will look for it, since its hard-coded in the code)
Data Bearer: High speed (GSM)
Dial-up number: e.g. 2222. It doesn’t matter what you have here as long as it’s not empty
Username: the username you gave access to the incoming connection earlier
Prompt password: No
Password: Password for the user on Windows
Authentication: Normal
Advanced Settings: Use Login Script Yes
Advanced Settings: Login Script
CHARMAP [windows-1252]
LOOP 10
{
SEND “CLIENT”+<0×0d>
WAIT 3
{
“SERVER” OK
}
}
EXIT KErrNoAnswer$OK:
EXIT
Be careful that you get it exactly as show here, including line breaks. You could save it to a file, send to the phone and copy-paste to the settings.
Advanced Settings: Use PPP Compression Yes
Run the program you installed at step1 (gnubox)
Inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in background
Run the nokia wml browser select “Bt” as access point and connect.
You can also use any other internet app like Agile messenger, real player, opera, profimail etc
I was able to connect, and view my website and could read this blog too. I was also able to receive and send out mail using profimail, and the built-in mail client.
I hope this posting helps all the Nokia 6600 owners, specially in India!
Update (Sep-16-2005) : Check this page and this page for more info on GnuBox for nokia 6600
