Well, I am not an Impulse buyer, but sometimes, some deals and offers are too hard to resists. So, ended up buying some electronics stuff in the last few days, which I kind of wanted to buy at the back of my mind.
- Got a 1 GB RS-MMC card with MMC Adapter - from meritline.com - got it for around $29 including shipping. I can use this card with my Nokia 6600 and also the Canon A610 digital camera.
- Mobile Bluetooth Headset - Got Logitech Mobile Freedom Bluetooth Headset from amazon.com for $27.50 - which is pretty good price. The actual cost advertised by logitech is around $59.99 - Also the reviews on this product is pretty good.
- Got a PNY 1 GB Mini Attaché USB 2.0 Flash Drive for around $20 (no rebates etc) from dell.com. This one yet yet to ship from dell.com.
- Bought a Mobile USB travel charger for iPod - No more PC/Laptop required to charge the Nano! - got this one for around $6!
I dont say that these would be the best ever prices that I would ever get these item. But its always best to buy when good deals are available. The catch is, these deals dont last long!. Good deals expire with a blink of the eye!!!! …….. ….there is always another time, but you need to keep an close eye on the deals available.
|
August 4th, 2006 at 02:55pm
Finally after lot of R&D, yesterday i could finally browse the net over my 6600 using my PC’s internet connection over bluetooth !
Two things are possible.
1. You use the GPRS of your Mobile phone and browse on your PC.
2. You use the DSL (or other high speed connection) of your PC to browse on your Mobile phone.
#1 is pretty simple, and is very easy to setup on Nokia 6600. But #2 is not that simple. After reading lot of forums, i found that Nokia has on purpose blocked this feature in 6600.
If you have already done a search on this topic, you would have definitely come across this page. But the instructions there are quite cryptic, and not very clear. So, i did lot of search on various forums, and finally got it right. What i have done is, i have basically documented the steps that i followed to make it work. Do give it a try!. It might work for you as well. If it works (or doesn’t) do comment here!
Steps…
First lets set up the PC. Things to do on PC :
- Deactivate all the Checkboxes in mRouter (at least the ones of the Bluetooth COM ports)
- Goto Bluetooth settings and Deactivate everything else in Local services than Bluetooth serial port, note the com port you set as bluetooth serial port
- Goto Phone and Modem options, go to “Modems” add a new one, activate “I will select it from a list”
- Choose “Communications cable between 2 Computers” from the list (in Standard Modem Types)
- Select the COM port from step3
- In the modem settings set maximum port speed to 115200
- Goto Network Connections and create a new connection (wizard)
- Select Set up an advanced connection -> Next
- Accept incoming connections -> Next
- Check the Communications cable between two computers -> Next
- Do not allow VPN connections ->
- select a username you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later) -> Next
- Select Internet Protocol -> Properties, select “TCI/IP address assignment” and set the IP range to something like 10.0.2.2-10.0.2.254
- Remove Internet Connection Sharing from all interfaces
- run cmd.exe and enter the following commands:
netsh routing ip nat install
netsh routing ip nat add interface "YOUR LAN INTERFACE NAME" full
netsh routing ip nat add interface Internal private
YOUR LAN INTERFACE NAME has to be replaced with the name of the interface connected to the internet
- if there is a “Bluetooth Network” connection in Network Connections delete it
- In network connections choose the incoming connection just created, and open its properties.
- Click on the users tab, check the last checkbox which says “Always allow directly connected devices to such as palmtop computers to connect without using a password” (this step helped me!)
So, that’s the setup on the PC. Next we need to configure the 6600
- Download gnubox6600.SIS and install it on your phone. Search Google for GnuBox
- Create a new Access Point on the phone (Setting|Connection|Access points|New access point|Use default settings).
- Use the following settings for it:
- Name: Bt (This name is important, the gnubox software will look for it, since its hard-coded in the code)
- Data Bearer: High speed (GSM)
- Dial-up number: e.g. 2222. It doesn’t matter what you have here as long as it’s not empty
- Username: the username you gave access to the incoming connection earlier
- Prompt password: No
- Password: Password for the user on Windows
- Authentication: Normal
- Advanced Settings: Use Login Script Yes
- Advanced Settings: Login Script
CHARMAP [windows-1252]
LOOP 10
{
SEND “CLIENT”+<0×0d>
WAIT 3
{
“SERVER” OK
}
}
EXIT KErrNoAnswer$OK:
EXIT
Be careful that you get it exactly as show here, including line breaks. You could save it to a file, send to the phone and copy-paste to the settings.
- Advanced Settings: Use PPP Compression Yes
- Run the program you installed at step1 (gnubox)
- Inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in background
- Run the nokia wml browser select “Bt” as access point and connect.
- You can also use any other internet app like Agile messenger, real player, opera, profimail etc
I was able to connect, and view my website and could read this blog too. I was also able to receive and send out mail using profimail, and the built-in mail client.
I hope this posting helps all the Nokia 6600 owners, specially in India!
Update (Sep-16-2005) : Check this page and this page for more info on GnuBox for nokia 6600
|
March 30th, 2005 at 04:36pm