Nokia 6600 Internet over bluetooth – How to

March 30th, 2005 at 04:36pm

Finally after lot of R&D, yesterday i could finally browse the net over my 6600 using my PC’s internet connection over bluetooth !

Two things are possible.
1. You use the GPRS of your Mobile phone and browse on your PC.
2. You use the DSL (or other high speed connection) of your PC to browse on your Mobile phone.

#1 is pretty simple, and is very easy to setup on Nokia 6600. But #2 is not that simple. After reading lot of forums, i found that Nokia has on purpose blocked this feature in 6600.

If you have already done a search on this topic, you would have definitely come across this page. But the instructions there are quite cryptic, and not very clear. So, i did lot of search on various forums, and finally got it right. What i have done is, i have basically documented the steps that i followed to make it work. Do give it a try!. It might work for you as well. If it works (or doesn’t) do comment here!

Steps…
First lets set up the PC. Things to do on PC :

  1. Deactivate all the Checkboxes in mRouter (at least the ones of the Bluetooth COM ports)
  2. Goto Bluetooth settings and Deactivate everything else in Local services than Bluetooth serial port, note the com port you set as bluetooth serial port
  3. Goto Phone and Modem options, go to “Modems” add a new one, activate “I will select it from a list”
  4. Choose “Communications cable between 2 Computers” from the list (in Standard Modem Types)
  5. Select the COM port from step3
  6. In the modem settings set maximum port speed to 115200
  7. Goto Network Connections and create a new connection (wizard)
  8. Select Set up an advanced connection -> Next
  9. Accept incoming connections -> Next
  10. Check the Communications cable between two computers -> Next
  11. Do not allow VPN connections ->
  12. select a username you want to give access to your pc over Bluetooth (that’s the username you will set on the phone later) -> Next
  13. Select Internet Protocol -> Properties, select “TCI/IP address assignment” and set the IP range to something like 10.0.2.2-10.0.2.254
  14. Remove Internet Connection Sharing from all interfaces
  15. run cmd.exe and enter the following commands:

    netsh routing ip nat install
    netsh routing ip nat add interface "YOUR LAN INTERFACE NAME" full
    netsh routing ip nat add interface Internal private

    YOUR LAN INTERFACE NAME has to be replaced with the name of the interface connected to the internet
  16. if there is a “Bluetooth Network” connection in Network Connections delete it
  17. In network connections choose the incoming connection just created, and open its properties.
  18. Click on the users tab, check the last checkbox which says “Always allow directly connected devices to such as palmtop computers to connect without using a password” (this step helped me!)

So, that’s the setup on the PC. Next we need to configure the 6600

  1. Download gnubox6600.SIS and install it on your phone. Search Google for GnuBox
  2. Create a new Access Point on the phone (Setting|Connection|Access points|New access point|Use default settings).
  3. Use the following settings for it:
    • Name: Bt (This name is important, the gnubox software will look for it, since its hard-coded in the code)
    • Data Bearer: High speed (GSM)
    • Dial-up number: e.g. 2222. It doesn’t matter what you have here as long as it’s not empty
    • Username: the username you gave access to the incoming connection earlier
    • Prompt password: No
    • Password: Password for the user on Windows
    • Authentication: Normal
    • Advanced Settings: Use Login Script Yes
    • Advanced Settings: Login Script

      CHARMAP [windows-1252]
      LOOP 10
      {
      SEND “CLIENT”+<0x0d>
      WAIT 3
      {
      “SERVER” OK
      }
      }
      EXIT KErrNoAnswer$
      OK:
      EXIT
      Be careful that you get it exactly as show here, including line breaks. You could save it to a file, send to the phone and copy-paste to the settings.
    • Advanced Settings: Use PPP Compression Yes
  4. Run the program you installed at step1 (gnubox)
  5. Inside gnubox: Options-> 2box Direct -> Bluetooth, select your computer, leave gnubox running in background
  6. Run the nokia wml browser select “Bt” as access point and connect.
  7. You can also use any other internet app like Agile messenger, real player, opera, profimail etc

I was able to connect, and view my website and could read this blog too. I was also able to receive and send out mail using profimail, and the built-in mail client.

I hope this posting helps all the Nokia 6600 owners, specially in India!

Update (Sep-16-2005) : Check this page and this page for more info on GnuBox for nokia 6600


Tags: , , , , , , , , , , , , , ,

Entry Filed under: Technology,Useful Stuff

Weekend fun at office, friends WordPress Website’s Search Engine Spam

Related Posts

212 Comments »

RSS feed for comments on this post. TrackBack URI

Pages: « 112 13 14 15 16 [17] 18 19 20 21 22 » Show All

  1. 161

    Hey Arjun! First of all, I want to thank you for making this simple guide. I’ve searched Yahoo and Google for 3 days and this is the most simple guide there is.

    The problem I wanted to ask you is that I still can’t use my Bt connection for my Nokia 6620. Everything connects fine, my computer recognizes the phone and visa-versa. But when I try to use Doris Browser, it stalls and says “DNS look-up failed” and when I try to use the Bt connection for Agile Messenger, it just stalls when trying to connect.

    Please help me, GPRS charges and way to expensive. Thanks in advance!

    Comment by Andy — August 6, 2006 #

  2. 162

    hi guys….i dint read all ur comments…
    wat i guess , like me many ppl want to browse the net using cell phone gprs on the PC rite.

    i am using airtle conenction(NOKIA 6600)…process is simple.
    1.pair ur cell and pc , blue tooth dongle
    2.call airtel customer to set the modem option right
    and bingo…use any s/w that comes with your bluetooth donlge…
    cheers

    Comment by smarak — August 12, 2006 #

  3. 163

    Hi Arjun,
    Fantastic efforts! Great write up! What i feel u could make it more elaborate & clear every steps. Clear every dbts. Thanx.!

    Comment by Rajesh — August 13, 2006 #

  4. 164

    Hi arjun ,
    I am inrerested in the first option that u have mentioned .ie using GPRS on my mobile for browsing on PC. i m using nokia 6600 with airtel.I tried using airtel mobile office.it was working fine on mobile but accessing it on pc through bluetooth was not working .Please help me, thankx in advance.

    Comment by Anil — August 22, 2006 #

  5. 165

    I am good @ configuring the dial up connection via bluetooth radio…. i.e. Browser Internet on computer through your Mobile with a wireless bluetooth connection… :-}
    If anyone of you require any assistance in configuring a BSNL GPRS activated sim with Nokia 6600 device via bluetooth, I can help you…. You need a BSNL GPRS activated sim, Nokia 6600 phone, CD of the nokia phone, a bluetooth dongle that supports Dial Up Networking, the CD of the Bluetooth donglu.

    For assistance you can even call me on 09448353990

    Comment by Ravi Raj — August 28, 2006 #

  6. 166

    Hi guys,
    plz plz plz help me here, i m almost through i can say 99.9%.
    let me give u specifucations
    1) I use nokia 6600.
    2) use bluesoleil ver 2.3.0.0.
    3)winXP
    4) i Use DSL using speed touch USB(shared on lan)
    *i dont have any router option niether on server nor on any computer.
    now the problem
    i get connected to computer,my computer shows in coming connection. it can recive bytes from mobile,but it cant send any when i try to open any link on mobile the byte get send to computer but but mobile dont recive any. and it gives error msg” services:no getway reply”
    plz guys help me out here.
    if u have any idia i will be really apriciate ur help.
    thanking u in advance

    Comment by Hatim — September 13, 2006 #

  7. 167

    Hi,dude i m usin’ bsnlgprs connected to pc.But it is crazyly killing my balance plz tell how can i stop althis n use bsnlgprs on pc in very chipway.Can i call u at what number?

    Comment by Himanshu — September 21, 2006 #

  8. 168

    Hi friends! Plz plz plz help me 1. I use nokia 66oo
    2. Connect internet through bluesoleil .
    3.Gprsnorth
    4.Win xp
    5.Before dail up i write username and password my self . Is it any other unique username password?
    6.When i connect internet it showing msge “Error:the ppp link control protocal was terminated” plz help me .
    My mobile 9419424468
    luckyshop2006@yahoo.com

    Comment by Imtiyaz Qazi — September 25, 2006 #

  9. 169

    Dear Friends,

    I have Nokia N6600 , my AgileMessenger has expired , plz i need new Agile Messenger full version, if any one has , plz send it to me on my mail,
    thanks

    Rehan Khan

    Comment by Rehan Khan — September 26, 2006 #

  10. 170

    Hi friends,
    I have Nokia 6600, i try connect internet via bluetooth, whene i type command: netsh routing ip nat add interface “Local Area connection” full then message: ” interface already owner by the protocol, the parameter is incorrect”
    Pleased help me !
    Thanks
    Hoa Le

    Comment by hoale — September 29, 2006 #

Pages: « 112 13 14 15 16 [17] 18 19 20 21 22 » Show All

Leave a comment

XHTML: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Most Recent Posts

Categories

Monthly Archives